Image Width (pixels):
| Analyzed File: | c15_tut02_inv.ipt |
| Autodesk Inventor Version: | 2020 (Build 240168000, 168) |
| Creation Date: | 5/9/2019, 10:45 AM |
| Study Author: | LENOVO-CADCIM |
| Summary: |
Project Info (iProperties)
Author CADCIM 00
Part Number c15_tut02_inv Designer CADCIM 00 Cost $0.00 Date Created 5/25/2017
Design Status WorkInProgress
Material Steel, Mild Density 7.85 g/cm^3 Mass 0.0056491 kg Area 1691.14 mm^2 Volume 719.63 mm^3 Center of Gravity x=0 mm
y=3 mm
z=3.67233 mmNote: Physical values could be different from Physical values used by FEA reported below.
Modal Analysis of the leaf spring:1General objective and settings:
Design Objective Single Point Study Type Modal Analysis Last Modification Date 5/9/2019, 10:42 AM Number of Modes 6 Frequency Range Undefined Compute Preloaded Modes No Enhanced Accuracy No
Mesh settings:
Avg. Element Size (fraction of model diameter) 0.01 Min. Element Size (fraction of avg. size) 0.02 Grading Factor 1.5 Max. Turn Angle 60 deg Create Curved Mesh Elements Yes
Name Steel, Mild General Mass Density 7.85 g/cm^3 Yield Strength 207 MPa Ultimate Tensile Strength 345 MPa Stress Young's Modulus 220 GPa Poisson's Ratio 0.275 ul Shear Modulus 86.2745 GPa Part Name(s) c15_tut02_inv.ipt
Constraint Type Fixed Constraint
F1 1405.39 Hz F2 2368.15 Hz F3 2749.27 Hz F4 4028.71 Hz F5 4579.98 Hz F6 6633.55 Hz
Name Result Value Volume 719.63 mm^3 Mass 0.0056491 kg
D:\Autodesk Inventor_2020\Resources\Resources\Inventor_2019_tut\Inventor_2019_tut\c15_Inv_2019_tut\c15_Inv_tut_2019\c15_tut02_inv\c15_tut02_inv.ipt
Image Width (pixels):
